Hikvision Digital Technology DS-2CD783F-EIZ Installationshandbuch PDF herunterladen (Seite 43)

Installation Manual of Network Camera

 Do not place the camera in extremely hot or damp environment. To avoid heat accumulation,

good ventilation is required for a proper operating environment.

 If the product does not function properly, please contact your dealer or the nearest service

center. Do not disassemble the camera for repair or maintenance by yourself.

 Ceiling mounting is recommended for this camera.

Note: The ceiling must be thick enough to withstand more than three times the weight of the

camera.

Steps:

1. Drill the screw holes on the ceiling with the supplied drilling template. If you need to route the

cables from the bottom of the camera, cut a cable hole in the ceiling.

Figure 3-51 Drill Template

2. Loosen the set screws with a hex key (supplied) to remove the lower dome.

Figure 3-52 Remove the Lower Dome

Hole

Ceiling Mounting

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 94 95

Keine Kommentare

Hikvision Digital Technology DS-2CD783F-EIZ Installationshandbuch Seite 43